By Shaye Thyer FCA, in collaboration with Fergus
Since October, the tradie Facebook groups have filled up with the same decision. “Rip the card option off the invoice. Go bank transfer only. Stop handing the bank a cut of every job.”
I get why. From 1 October 2026 you can’t add a surcharge when someone pays by eftpos, Visa or Mastercard, and Amex has dropped it too. If you used to pass that fee on to the customer, it now comes out of your pocket instead. Nobody likes copping a new cost.
I’ve spent twenty years as a CFO and chartered accountant pulling businesses out of cash-flow holes. What I tell them is that the fee is the cheap part. What costs you is the money you’re owed and can’t get your hands on, sitting in someone else’s account while your own bills come due.
You can’t pay your suppliers, your apprentice or yourself with money that’s still in the customer’s account. Every extra day it sits there is a day you’re covering the job out of your own pocket. The fee is easy to be angry about, because it’s a number on a statement you can point at. The cost of waiting is harder to see. It’s spread across your week in bits too small to notice, so it wins an argument it shouldn’t.
Most of what I clean up for business owners is a decision that got made too late. By the time you’re chasing an overdue invoice, the problem has already started, usually back at the quote.
So start there. Ask for a deposit when the customer accepts the quote. On a $20,000 rewire, a 30% deposit is $6,000 towards your materials before you’ve lifted a tool, and you’re not fronting the whole job out of your own pocket while you wait to get paid at the end.
Then don’t finish a job still hoping the money shows up. Take payment on site, the day it’s done, while you’re standing there and the customer’s happy with the work. If I’d done a job at someone’s house, I wouldn’t be packing up the van before I’d been paid. You shouldn’t either.
And have a look at your terms while you’re at it. Thirty-day terms mean you’re lending your customer money, interest-free, to go and spend somewhere else. You’re not a bank.
Think about what you’re actually asking when you send your bank details and wait. Your customer has to find the email, open the invoice, open their banking app without getting pulled into something else, key in your BSB and account number without fat-fingering it, pick a date, and confirm. Six or seven little steps, and every one is a place the payment can stall.
They’re not trying to dodge you. They mean to pay. But the phone rings, the kids need feeding, the banking app wants a new code, and the invoice slides down the inbox. Two weeks later it’s overdue and neither of you meant it to be.
A card payment is one tap. That’s why it’s worth wearing the fee: $19.80 is a small price to get your money in a day or two instead of a fortnight. And cards are how your customers already want to pay. On the Reserve Bank’s own numbers, about 73% of all payments Australians made in 2025 were by card.
Fergus has built this into Fergus Pay, (which is where this article is running, so I’ll be upfront about it.) Card payments sit on the invoice as a Pay Now button, and Fergus’s own data shows customers pay roughly twice as fast with it switched on. There’s one more upside to the surcharge ban: with no fee added at checkout, Fergus has found customers are 2.5 times more likely to pay on the spot. Faster money = better sleep.
On a small job the card fee is loose change. On Dave the plumber’s $1,000 hot water repair it’s about $19.80. Dave gets his money the next day instead of chasing it for a fortnight (or getting grief for asking his wife Sharon to do it), and ten minutes of admin at $120 an hour already costs him more than the fee did. Taking the card is the easy call.
On a big job the percentage starts to hurt. On a $20,000 electrical job the card fee is around $390. This is where a lot of owners dig in, and they’ve got half a point, $390 is real money. But going bank-transfer-only to save it drags you straight back into waiting and chasing on your largest invoices, which is the worst place to be slow.
Direct debit is the better answer here. It pulls straight from the customer’s bank account once they’ve approved it, it’s still a Pay Now button as far as they’re concerned, and through Fergus Pay the fee is capped at $5. On that $20,000 job, that’s $5 instead of $390, with far less to go wrong than a hand-keyed bank transfer. It takes a couple of extra days to clear than a card does. For a payment that size, worth it.
Send the invoice before you arrive on the day you are due to finish. Across more than 61,000 jobs, Fergus found invoices sent the same day were typically paid in about three days, against 26 days when they went out two to four weeks later. The cheapest thing you can do to get paid faster is to not sit on the invoice.
And stop chasing by hand. Automated reminders by text and email do the first round for you, so you’re not spending your Sunday working out who still owes you what. Australian small businesses lose around an hour and a half a week to chasing payments, close to two working weeks a year, on GoCardless’s numbers. That’s time you could spend on the tools, or not working at all.
The pressure is real and it’s getting worse. In building and construction, twice as many invoices are now getting paid more than 60 days late as a year ago, up from 6% to 13%, on CreditorWatch’s September figures. A third of small businesses have reached for a credit card or a loan to cover the gap when a customer pays late. When money’s tight, the last person to get paid is almost always the owner. That’s what keeps you up at night, not the card fee.
So do the sums on the fee if it’s bugging you. I’m an accountant, I’d never tell you to ignore a number. But the owners I work with who’ve stopped lying awake over cash didn’t get there by going back to bank transfer. They got there by not being owed the money in the first place: a deposit up front, the rest paid before they leave the job, and the final invoice a one-tap payment sent the day the work’s done. For them the surcharge ban barely matters, because they were never really waiting on the money anyway.
Shaye Thyer FCA is a Fellow Chartered Accountant and consulting CFO with more than 20 years in finance. She helps founders and business owners take control of the money, including the many women who run the books behind Australia’s trade businesses. Follow Shaye on LinkedIn or grab a complimentary chat with Shaye here.

Written by Shaye Thyer in collaboration with Fergus. Fees quoted are Fergus Pay’s Australian rates (card 1.95% + $0.30, direct debit 1% capped at $5) and may change; the worked examples are illustrative and assume an hourly rate of $120 and overdraft interest of around 10% a year.
Less admin, a clearer read on your trades business.
Our 26,000+ trades businesses have slashed their admin, are getting paid faster, and are finally enjoying their weekends again.